Noiposi 3.7V 850mAh 25C Lipo Battery 5Pcs and X6 Charger for Syma X5C X5C-1 X5SW X5C-1 X5SC X5SC-1 Cx-30 Cx-31 Quadcopters

Description

✌Noiposi 5Pcs 3.7V 850mAh 25C Lipo Battery for Syma X5C X5SW X5SC X5A X5
☞This 3.7V 850mAh LiPO battery is a replacement battery.
☞It’s going to give more PUNCH and ROBUST performance as a result of its higher current output and power.
☞Up to 30% longer flying time than orginal battery,high capacity can make your drone show various difficult movement

✌Specification:
☞Voltage: 3.7V
☞Capacity: 850mAh
☞Continuous discharge rate:25C
☞Size::43*25*10mm/1.69*0.98*0.39inch
☞Weight:18g/0.039b

✌Package List:
☞5pcs*3.7v 850mah 25c lipo battery
☞1*X6 charger

✌Compatible with these Syma models:
☞Syma X5
☞Syma X5C
☞Syma X5C-1
☞Syma X5SC
☞Syma X5SW
☞Cheerson CX-30W
☞Direct replacement battery for these,no modification is needed.

✌X6 Intelligent Charger for 3.7V Lipo Battery:
☞Advance individual charging method – charges every cell individually
☞Overcharge protection
☞Short-circuit protection
☞Light weight
☞Red Lights on: currently charging
☞Red Lights off: charging complete

✌Caution:
ϟ1.Input voltage:5V Input current:2A
ϟ2.Do not use the adapter of over 5V to charge the batteries
ϟ3.Do not charge the batteries of different capacity at the same time,because their voltage and current are different.
★3.7V 850mAh 25C Lipo Battery 5Pcs and X6 Charger，Battery Size:43*25*10mm/1.69*0.98*0.39inch
★Compatible for:Syma X5 X5c X5c-1 X5sw X5sc X5sc-1 Cx-30W Cx-31 Cheerson Cx-30 Rc Quadcopters
★Charger Voltage input: DC 5V; Voltage output: 4.2V,Over charge protection, Short circuit protection
★★Warranty: 6 Month Warranty. We provide friendly after-sale service and no risk refund for our customers. You probably have any issue,please contact us and We can try out best to slove your issue!
★Syma X5C/X5C-1 wish to make some modifications to the battery compartment for this battery to fit. It is several millimeters thicker than the stock batteries. All you wish to have to do is snip a piece from the center of the battery holder to provide the extra millimeters you wish to have for the camera/battery cover to fit right. It still holds the stock batteries perfectly and it allows the camera/battery cover to fit properly.Or you should take out the battery door,It’s going to fit better.
[amz_corss_sell asin=”B016CWDXXA”]