Description
Notice: According to revel in customs will charge duties. Please be prepared
Product Details
Brand name: Eachine
Item Name: Lizard95 95mm Micro FPV RACING DRONES BNF
Size:115mm x 115mm x 60mm
Weight: 66( battery now not include)
Flight controller: Betaflight F3 Flight controller built-in OSD
Motor: Eachine 1104 KV6000 brushless motor
Propeller: 50mm 5-blades propeller
Camera: 600TVL HD CMOS 1/4inch
VTX: 5.8g 25MW/100MW Switchable 48CH NTSC/PAL Video transmitter
Battery: 11.1V 550mah 40C lipo battery
OSD: Betaflight OSD
Firmware of Flight controller :Betaflight 3.1
Flight time : 4minutes
Rear LED In a position( LED_Strip serve as)
Buzzer: Ready
ESC specification:
Firmware version: BLHELI_S 16.5
BB2, 48MHZ Chip
Lipo Battery: 2S-3S
Con. Current: 10A
Peak Current: 15A (10S)
BEC: 5V at 0.1A
Programming: YES
Betaflight pass-trough ready
Dshot600 In a position(Default)
Give a boost to oneshot42 oneshot125 Multishot Dshot
Damped light on
Package Included
1 x Eachine Lizard95 Frame kit
1 x Betaflight F3 6DOF flight controller build-in OSD
4 x Eachine 1104 6000KV brushless motor
1 x Minicube 10A BLHELI_S 16.5 2s-3S 4 in 1 ESC Dshot600
1 x 50mm 5-blades propeller Set
1 x 600TVL HD CMOS 1/4 inch camera
1 x 5.8g 25MW/100MW Adjustable 48CH NTSC/PAL VTX
1 x 11.1V 550mah 40C lipo battery XT30 plug
1 x WS2812 LED Board
1 x Buzzer(Integrated in Receiver)
Jaw-dropping flight performance, Betaflight Give a boost to, Adjustable Angle of Camera, and Adjustable VTX Power 25mw/100mw
Extremely light and powerful. Smooth stability achieved with STM32 F303MCU and BLHELI_S ESC
Modes supported: Acro mode / Air mode / Angle mode
Built-in OSD(The usage of F3 MCU controls OSD over SPI bus in DMA mode) and OSD Configuration has been include in BETAFLIGHT GUI
Radio Keep on with keep an eye on and tune Proportional Integral Derivative (PID), BLEHELI_S pass-through In a position, and Telemetry RSSI Output In a position(Frsky Version most effective)
[amz_corss_sell asin=”B077Q4MG5L”]
Reviews
There are no reviews yet.