SunFounder 250 FPV Quadcopter Drone Frame Kit CC3D EMAX ESC Simon 12A Motor MT2204 Carbon Fiber Racing Flying 4-Axis Propellers Battery Balance Charger for Lumenier QAV250 ZMR250

Description

Introduction
The realization of FPV flying starts from having a SunFounder 250 aircraft. The SunFounder 250 Quadcopter is tailored for the hobbyists for FPV flying. It features stability, flexibility and activity. You’ll be able to realize a stable flight in a high or low altitude or in a forest with the SunFounder 250. The skid landing damping sponge tubes bound onto the motors lend a hand stablize the flight and give protection to the frame through increasing the buffer between the frame and the land when the aircraft is landing.
It runs the OpenPilot firmware of the flight controller firmware and the 12A EMAX brushless electronic speed controller. This kit is designed to meet the hobbyists’ higher requirement of flying the aircraft. You’ll be able to realize a stable flight in a small space or a rapid 3D flight based by yourself configuration and parameter setting.
The Image Transceiver Kit is to be had on http://www.amazon.com/dp/B01MCT9K5E
For the FPV TFT LCD, you’re beneficial to this link: https://www.amazon.com/dp/B01LXZAP8M

Package included
1 x Quadcopter Frame (set)
4 x EMAX CW /CCW Motor
1 x Balance Charger
1 x Battery Indicator
1 x Power Adapter
4 x EMAX ESC
1 x Li-Po Battery
4 x CW/ CCW Propellers
1 x CC3D Flight Controller
1 x Adapter Cable
1 x USB Cable
1 x Heat Shrink Tubing
5 x 3M glue
20x Nnylon Zip Ties
4 x Damping pipe
24x Banana Bullet Connector
1 x Damping plate (set)
1 x Section Board
1 x Lashing
1 x Allen Wrench
1 x Velcro Tape
The SunFounder 250 quadcopter is tailored for hobbyists and beginners for FPV flying.
This aircraft is light in structure with its propeller blades featuring high strength, explosive-resistant and small wind resistance because of their smooth design.
It runs the firmware of CC3D flight controller, working with the EMAX MT2204-2300KV motor and Simon 12A ESC.
Weight: 497.2g ; Duration of flight: 8 minutes；Working voltage: 11.1V
CC3D software debugging guide and the assembling videos of the aircraft are provided for you. https://www.sunfounder.com/wiki/index.php?title=SunFounder_250
[amz_corss_sell asin=”B01M3T5YZF”]